Oct 18 , 2015

Sure the weather is still warm in October but you should not wait until the cold weather arrives to maintain your furnace. Through preparing your furnace for winter requires a little effort to keep you and your family comfortable when the cold weather finally gets here. The U.S. Federal Emergency Management Agency suggests checking your furnace before cold weather arrives so if your furnace malfunctions, you can have it repaired before you need indoor heating~ what a concept!

Here are some helpful tips for you:

  • Replace the air filter in your furnace each Locate the filter and pull it out. Slide the new filter into the slot, following the arrows on the frame of the filter.
  • Consider upgrading the filter if your current filter is a flat filter. Upgrading to a pleated filter, HEPA filter or electrostatic filter increases the energy efficiency of your furnace and allows the warm air to flow unimpeded through your home.
  • Clean your air vents and ducts. Remove the vent covers with a screwdriver. Use the extension hose of your vacuum to remove the dust.
  • Inspect the blower belt for cracks. Turn off the power to the furnace at the main circuit breaker. Use a screwdriver to remove the steel cover of the air handler. The blower belt is the largest rubber belt that you see. Replace the belt if it is cracked.
  • Engage your set-back, or programmable, thermostat so it automatically lowers the temperature while you are asleep or away from your home. According to the Consumer Energy Center, you could save from 20 to 75 percent on your furnace’s operating costs by using this type of thermostat.
  • Inspect the exhaust flue outdoors to ensure it is free of obstructions such as branches or animal nests.
  • Keep the area around your furnace unit free of debris and clutter.
  • Open all your air vents. Remove furniture, boxes and clutter that get in the way of air flowing from the vents.
  • Any problems? Call Family Air Cooling and Heating and we’ll get it fixed for you!

Tips from SF Gate Home Guides, Jessica Lietz

Sep 15 , 2015

SEER measures the ratio of cooling capacity to power input, and the higher the rating, the more efficient the air conditioner. SEER ratings have gradually increased in recent years, so you might find great value in replacing your 10 year-old system with a more efficient and newer model. Even new entry-level models are much more efficient than standard models of decades past.

Nationwide, EPA standards require all air conditioners manufactured after the first of January 2015 to have a minimum rating of 14 SEER.  Prior to that, all systems had to achieve at least a 13 SEER rating.

The federal Energy Guide label can help you determine your current unit’s SEER rating at a glance. It will be prominently displayed, along with a range comparing it to other units.  If you are thinking about purchasing a new unit, the Department of Energy offers online energy efficiency calculators http://energy.gov/eere/femp/energy-and-cost-savings-calculators-energy-efficient-products  to help you forecast how much money you will save on energy costs with equipment that carries a different SEER ratings.

Aug 30 , 2015

When is it time to replace?

Energy Star lists the following telltale signs that indicate that it is time for you to consider replacing your heating and cooling equipment, or improving the performance of your overall system.

Your heat pump or air conditioner is more than 10 years old.

Consider replacing it with a unit that has earned the ENERGY STAR label. Installed correctly, these high-efficiency units can save up to 20% on heating and cooling costs.

Your furnace or boiler is more than 15 years old.

Consider replacing with an ENERGY STAR qualified furnace, which is 15% more efficient than a conventional furnace. If you have a boiler, consider replacing with an ENERGY STAR qualified boiler that is 5% more efficient than a new, standard model.

Your equipment needs frequent repairs and your energy bills are going up.

Your cooling or heating equipment may have become less efficient.

Some rooms in your home are too hot or too cold.

Improper equipment operation, duct problems or inadequate insulation could be the cause.

No one is home for long periods of the day and you do not have a programmable thermostat.

Install a programmable thermostat or have a good contractor install one and instruct you on its use — to start saving energy and money while they’re away or sleeping.

Your home has humidity problems.

Poor equipment operation, inadequate equipment, and leaky ductwork can cause the air to be too dry in the winter or too humid in the summer.

Your home has excessive dust.

Leaky ducts can pull particles and air from attics, crawl spaces and basements and distribute them throughout your house. Sealing your ducts may be a solution.

Your heating or cooling system is noisy.

You could have an undersized duct system or a problem with the indoor coil of your cooling equipment.

Family Air can help you determine if you need to make a change.


Jul 07 , 2015

Excerpt from This Old House Magazine article on “Air Conditioners Really are Getting Better” by Max Alexander


All in the Sizing

No matter how efficient your air conditioner is, it needs to be sized correctly for maximum comfort and minimum energy expense. The key is proper balance between the condenser, where the refrigerant is pressurized and cooled, and the evaporator, where indoor air is cooled and dehumidified before being circulated through the house’s ductwork by the air handler.

Condensers are sized by the refrigeration ton, or “ton” for short. That’s the amount of refrigeration needed to freeze one ton of water in 24 hours — 12,000 Btus per hour. As a general rule, it takes a ton of air-conditioning to cool 1,000 square feet of well-insulated space. When recommending size, a savvy air-conditioning contractor will take into account the home’s layout, insulation levels, air leakage, sun exposure, and general climate.

Undersizing a system can overwork the condenser and clog it with frost, which shuts the system down (for a time). But according to Richard Trethewey, This Old House’s plumbing, heating, and cooling expert, oversizing is the more common problem because contractors tend to jack up the tonnage in hopes of avoiding future complaints. “More is not better,” Richard warns. The house cools down so quickly that the thermostat shuts off the air handler before it has a chance to fully circulate and dehumidify the inside air. “Your house ends up feeling cold and clammy,” he says. His advice: Tell your contractor that you intend to keep the summer thermostat at 75 degrees — perfectly comfortable if the inside air has been sufficiently dehumidified.

Richard also recommends investing in a two-stage compressor, which works at full power only on the hottest days. The rest of the time, it doesn’t compress (and, by extension, cool) the refrigerant as much, so the air handler operates longer and has more time to squeeze humidity out of the indoor air. “You save energy and you’re more comfortable,” he says. “How can you beat that?”

Still, before you run out and replace your old system with a new and improved one, do some homework. The amount you should invest depends on how many days you’re likely to run it and your cost of electricity. “You don’t want to spend $2,000 for a system that saves you $100 a year,” Richard says, especially since condensers last only about 15 years. And when it’s time for an upgrade, make sure to replace the evaporator at the same time. If you try mixing old and new components, you’ll probably end up with a ruined compressor and no AC when you need it most. And that’s definitely not cool.

Jun 02 , 2015



Jun 01 , 2015

Air conditioning your home makes up approximately 44% of your monthly utility bill, according to the U.S. Department of Energy. Here’s some ideas on how to reduce those costs during the summer time:

1) Plant leafy trees that will grow at least 15 feet around your home’s exterior to stop the sun from reaching inside. If the trees or shrubs shade your air conditioner, you could boost your AC’s efficiency by up to 10%.

2) Installing solar screens or mesh-like window screens can result in intercepting up to 70 % of solar energy before it gets into your house

3) Lower your air conditioners thermostat setting to 78 degrees Fahrenheit when you’re at home. But let that number rise to a warmer temperature at night or when you’re away from home. This trick will save you 5-15% percent on your air-conditioning bills.

4) Set you AC fan speed on high, except on very humid days where you should set the speed on low. The slower air movement through the air-condition unit removes moisture from the air and improves comfort in your home.

5) Use fans to circulate air inside the house while you are at home.

6) Skip the stove-top boiling and oven baking; summer is for grilling and keeping the kitchen cool!

7) Make sure your AC unit is running efficiently by keeping the filter clean to allow for good air movement and keep the unit level so the condensation drains properly

8) Replace your older air conditioner with a newer unit and you could cut your energy costs in half.

9) Call Family Air to for an air conditioner check and make sure everything is running properly!

*All percentages are according to the US Department of Energy

Dec 14 , 2014


In: Energy Savor Blog

Comments Off on High Electric Bills?

I’m sure many of us have opened our electric bill in Tucson and thought turn off the AC, this is outrageous! That is where Family Air comes in. We can provide you with tips that can help you save bundles. 

To start off, we recommend changing your filter at least once every month. Although, if you have pets and are in an area with high dirt and dust, we recommend checking it monthly. This will not only help on your electric bill, it will provide better air flow and provide you with a better running efficient system.

We know that some systems are just at that point where they are out dated and are running harder and harder by the day. We have many new high efficient systems that we can provide you with, that will fit your best needs and keep your wallet fat and lower your electric bill.

At Family Air we know that times are hard and that’s why we make the effort to provide you with not just quality systems but quality service as well. So give us a call at (520) 369-3445 and let us handle your comfort!

Dec 12 , 2014


In: Energy Savor Blog

Comments Off on Free Estimate on AC Replacement in Tucson

Replacing your existing Heating and Cooling system in Tucson can be a bit stressful. That’s why, at Family Air, we send our trained Comfort Consultant to help you find the perfect fitting system for your home.

Weather you accept our estimate or not, it doesn’t cost anything for you to receive one from us.Our bids always include everything that we believe will make your system perform at best efficiency, meaning you will not find any additional charges at the end of the job. At Family Air,we pride ourselves in our installations and back it up 100%. If you have any questions feel free to call Family Air at (520) 399-5850 “Where your comfort is our responsibility.”

Oct 24 , 2014


In: Energy Savor Blog

Comments Off on hvac repair in tucson

Have you had your HVAC system in Tucson inspected recently? Even though it has been freezing in Tucson recently, the hot weather is on its way! It is better to make sure you do not need HVAC repairs before it hits.

Make sure you make that call to have someone come out and inspect your air conditioning unit before the rush is on. Many times people find out their air conditioning unit is not functioning properly on the first hot day of the year and it takes a while to get a technicain out to repair it. Don’t get caught unexpectadly with no AC and an unbearably hot home.

Oct 05 , 2014


In: Energy Savor Blog

Comments Off on HVAC inspections in Tucson

We pride ourselves in customer satisfaction and what better way to do that then to save you
money. We recommened having a trained professional go out to your home and do a inspection of your air conditioning unit to ensure proper function.

When doing an AC inspection in Tucson, we are then able to troubleshoot problems that may occur when summer has already hit, so why not catch it before and save the sweating and hassle of the hot?

Here at Family Air, we like to make sure that your system is running at its highest efficiency, so give us a call now at (520) 369-3445, and let us take care of your comfort!